f9d76bec5c5a618689519676ef64af13273966c9fb0870384b12c2629f566bed

Park Brakes SET Battery switch ON Strobe and Beacon Lights ON Click on automatic startup engine button or CTRL+E PERFORM

Startup Engine Time LOGGED Engine power IDLE Low Idle CHECKED Fuel/Weight CHECKED AND LOGGED Avionic Master ON ATIS LOGGED Navaids SET AP Settings SET AP MAIN OFF Pitot Heat ON NAV Lights AS NEEDED

Flaps 7° (1ST POSITION) Prop RPM HIGH Trim position CHECKED AP MAIN and Flight Director ARMED Anti-Ice AS NEEDED Altimeters SET Landing Lights ON Transponder CODE SET

Thrust MAX POWER OR 95% Release Brakes Engine parameters CHECK Rotate at MTOW 115 KTS Pitch attitude after T/O 10° Retract landing gear with positive ROC At 500 ft and 130 kts IAS — Flaps UP Let accelerate to 160 kts IAS Reduce TORQUE 90-95% Engage AP with an initial ROC 2000 FPM Maintain until cruise altitude 160 KTS IAS AND 1500-2500 FPM ROC

Reduce Prop RPM (ctrl-F2) 1650 RPM Reduce TORQUE 75-80% Usual cruise altitude is FL150-FL200 Standard cruise speed is 280 kts TAS

Establish a descent rate 1,500 FPM Maintain during descent 240 KTS IAS Landing Lights below 10,000 ft ON

PROP RPM (ctrl-F4) HIGH Level approach flight (20-25 NM) clean configuration 210 KTS Glide slope alive — reduce speed and set Flaps 1 (7°) 170 KTS Passing the OM or 1500 ft — Gear Down, Flaps 3 (20°), Speed (Vref+5) 125 KTS