Cessna 152 — Sam_Dawson_152n_ground

Before Starting Engine Preflight Inspection Complete CRM/Passenger Briefing Complete Seats and Seat Belts Adjust & Lock Brakes Test & Set Fuel Selector ON Mixture Full Rich Throttle 1/2 inch Carburetor Heat Cold Avionics Master Switch Off Electrical Equipment Off Circuit Breakers Check In

Starting Engine Prime As Required Master Switch On Exterior Lights As Required Propeller Area Clear Ignition Switch Start Throttle 1000-1200 RPM Oil Pressure / Ammeter Check

Before Taxi Flaps Take Off Position Mixture Lean Throttle 1000 RPM Avionics Master (Radios) On ATIS / AWOS Receive Clearance Obtain Avionics / Transponder Set / STBY Flight Instruments Check & Set Engine Instruments Check

Taxi Brakes & Steering Check Flight Instruments Check

Before Takeoff Cabin Doors Closed & Locked Seats / Seat Belts Upright & Secured Flight Controls Free & Correct Clock Check Fuel Quantity Check Engine Instruments Check Flight Instruments Check & Set Radios / Avionics Set for Departure Fuel Selector ON Elevator Trim Check / Set Flaps Set for Takeoff Mixture Enrichen Throttle 1700 RPM Mixture Set for Takeoff Carb Heat Check Magnetos Check (±125/50) Engine Instruments / Ammeter Check Vacuum Green Arc Throttle Idle / 1000 RPM Departure Briefing Complete - Type T/O, Vr-, Vy-, Vx-, Emerg. Altitude

Shutdown and Securing Avionics Master Switch Off Exterior Lights (except beacon) Off Throttle 1000 RPM Mixture Idle Cut Off Magneto Switch Off Battery and Alternator Off Gust Lock Install Post Flight Inspection Accomplish Internal and External Covers Install Tie downs and Chocks Install